UVILIZER Go - Product Support & User Guide UVILIZER Go - Product Support & User Guide

To better understand the UVILIZER Go here is more information about it below.

The UVILIZER Go has a built-in battery that requires charging to work properly. The UV light has some battery life right out of the box, but we recommend charging it for up to two hours to get it fully charged before using it.

If when plugged in the light is not charging, please attempt to connect the USB cable to another power source location or if possible please attempt to use another USB cable if you have one handy.

Once charged and ready for use, first slide the top section up and out of the case by pulling the top section up until the UV light bulb is visible.

Once the UV light is out of its case, to power on the UVILIZER Go touch and press your finger for 3 seconds on top in the middle of the bronze section of the light. Once powered on the power light indicator will turn green near the USB port on the back.

The UVILIZER UV light kills up to 99.9% of bacteria, viruses and germs on all surfaces you aim it at.

Once you are done using the light, to power it off tap or touch the same top middle section quickly and the power light indicator on the back near the USB port will turn off.

Here is an image of the UVILIZER Go User Guide below as well:

If the your still encountering issues please let us know so we can assist further. Rest assured, if the item is indeed faulty after some additional assistance and troubleshooting we would be more than happy to replace it with a new working one as soon as possible. With our 1 year replacement warranty and lifetime customer support know that you are always covered.

Hope this was helpful. Please let us know if you have any further questions we can assist with. We're here to help.

To better understand the UVILIZER Go here is more information about it below.

The UVILIZER Go has a built-in battery that requires charging to work properly. The UV light has some battery life right out of the box, but we recommend charging it for up to two hours to get it fully charged before using it.

If when plugged in the light is not charging, please attempt to connect the USB cable to another power source location or if possible please attempt to use another USB cable if you have one handy.

Once charged and ready for use, first slide the top section up and out of the case by pulling the top section up until the UV light bulb is visible.

Once the UV light is out of its case, to power on the UVILIZER Go touch and press your finger for 3 seconds on top in the middle of the bronze section of the light. Once powered on the power light indicator will turn green near the USB port on the back.

The UVILIZER UV light kills up to 99.9% of bacteria, viruses and germs on all surfaces you aim it at.

Once you are done using the light, to power it off tap or touch the same top middle section quickly and the power light indicator on the back near the USB port will turn off.

Here is an image of the UVILIZER Go User Guide below as well:

If the your still encountering issues please let us know so we can assist further. Rest assured, if the item is indeed faulty after some additional assistance and troubleshooting we would be more than happy to replace it with a new working one as soon as possible. With our 1 year replacement warranty and lifetime customer support know that you are always covered.

Hope this was helpful. Please let us know if you have any further questions we can assist with. We're here to help.